| Warranty: | 1 Year |
|---|---|
| Max.Head: | 10-30m |
| Max.Capacity: | >400 L/min |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Cool Running & Long Lifetime Motor
Advanced technology motor with qualified material allows cool & quiet running. Combines durable corrosion-proof construction with state-of-the-art performance for years of trouble-free service.
|
Qualified Pump Parts
High quality gold color ground screw with black appearance makes the pump quite nice-looking and safe to operate.
|
Various size of unions availale
1.5 inch union connections for both suction and discharge ports;
Unions can be included in the pump carton on request. Union size: 48mm, 50mm, 60mm etc.
|
SS Shaft
High-precision Stainless Steel shaft reduce noise to 60 dB. Thermostable oil bearing endure temperature rating at 150ºC
|
Well Made Coil
Well made coil with a built in thermal protector allows longer lifetime of the motor. The thermal protector will stop the pump on temperature over 155ºC and re-start the pump once the motor cools down to 105ºC
|
Various Plug Available
Pump power plug can be custominzed to any style you need to meet local standard in every Country.
|
| Model | WPPE500 WPPE700 |
WPPE800 | WPPE900 | ||||
| L(mm) | 335 | 345 | 355 |
Model |
Power |
V/Hz | Qmax |
Hmax |
Fiting size |
G.W |
Packing Size |
( Qty/20') |
|||||||||
| L/min | Meter | mm | kg | mm | |||||||||||||
| WPPE500 | 500W/0.7HP | 220-240V /50Hz |
300 | 8 | 48.5/50 | 5.5 | 360x160x205 | 2455 | |||||||||
| WPPE700 | 700W/0.9HP | 330 | 10 | 6.6 | |||||||||||||
| WPPE800 | 800W/1.1HP | 350 | 10.5 | 6.9 | |||||||||||||
| WPPE900 | 900W/1.2HP | 400 | 11 | 7.3 |
WPP SERIES Spa Bath Pumps
Should the installer or owner be unfamiliar with the correct installation or operation of this type of equipment you should contact the distnbutor manufacturer for the correct advice before proceeding with the installation or operation of the product
Congratulations on your decision to purchase a product.is one of the best known companies in is field,with a proud local and international reputation.
1. Continual Product Improvement employ the best engincers from around the world to develop new and better ways to pump and handle water.
2. Dedication to Quality There is only one standard that we at set ourselves for both product quality and the quality of our service.That standard is excellence.…to have No-ane better than us at what we do..nothing short of that is acceptable
3. A Fair Price Our products always represent very good value for money-they always have and they always will.
OPERATING INSTRUCTIONS--------------------- WPP Series Spa Bath Pumps
(Model WPP600,WPP750.WPP900,WPP1100,WPP1500)
1.Spa Pump Position
If the spa bath pump is supplied separately to the spa bath,postion the pump as close as possibie to
the spa.This will ensure optimum spa jet performance.The spa bath pump must be protected from exposure to weather,It is important to ensure that there is adequate ventilation provided for the spa pump(minimim area 104 sqem).Without adequate ventilation the pump motor will over heat causing nui sance motor stops and starts.Failure to comply with these instructions may cause pump damage and/or removal costs shich are not covered by the warranty.
2.Plumbing Installation
spa bath pumps are supplied complete with integrated harrel unuons to allow easy
installation of PVC pipework.
The spa bath pump must be mounted below the normal operating spa bath level but above the spa bath to ensure correct pump priming and pump/pipe drainage(see Fig.)All water must drain back into the sap when emptied .This is in accordance with local Health
Ensure pipes rise evenly from the spa bath to the spa bath pump to avoid airlocks(otherwise the sna pumn will not prime,refer Fig.1).All nine conneetions must be watertight.Never allow spa pump to run without water as this may result in damice to the pump sea.
1.Can valve electric actuators be retrofitted to existing systems?
Yes, in many cases, valve electric actuators are designed to be retrofit-friendly. However, it's crucial to consider compatibility, sizing, and potential modifications to ensure a seamless integration into existing systems. Consulting with manufacturers and industry experts can provide guidance on retrofitting options.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}